How Cross Stitch Calculator Metric Works?
The cross stitch calculator metric works by converting threads per inch to threads per centimetre and sizing everything in centimetres, millimetres and metres. 14-count Aida converts to 5.51 stitches per cm and 1.81 mm per stitch.
You enter
- Threads per inch or per cm
- Over 1 or over 2
- Width and height in stitches
- Margin each side in cm
- Strands of floss
You get
- Stitches per cm5.51
- Stitch size1.81 mm
- Design size21.8 × 16.3 cm
- Fabric to cut36.8 × 31.3 cm
- Floss per 1,000 stitches12.3 m
5 Steps the Cross Stitch Calculator Metric Follows
- Enter the count. Type threads per inch or threads per centimetre; the dual scale converts one into the other.
- Apply over 1 or over 2. Threads per cm ÷ threads stitched over gives stitches per cm.
- Size in millimetres. 10 mm ÷ stitches per cm gives the size of 1 stitch.
- Size in centimetres. Stitches ÷ stitches per cm, plus 2 margins, gives the design and the fabric.
- Measure the floss in metres. Thread for 1,000 stitches is shown in metres of floss cut from the skein.
Cross Stitch Calculator Metric Formula
The cross stitch metric formula is stitches per cm = threads per inch ÷ 2.54 ÷ threads stitched over. Every size then follows in centimetres and millimetres.
threads per inch ÷ 2.54threads per cm ÷ threads over10 mm ÷ stitches per cmstitches ÷ stitches per cm- 2.54
- Centimetres in 1 inch
- 10 mm
- Millimetres in 1 centimetre
Worked example: 14 threads per inch, over 1, 120 × 90 stitches
- Threads per cm
14 ÷ 2.545.51 - Stitch size
10 ÷ 5.511.81 mm - Design size
120 ÷ 5.51, 90 ÷ 5.5121.8 × 16.3 cm - Fabric to cut
21.8 + 15, 16.3 + 1536.8 × 31.3 cm - Floss per 1,000 stitches
1,000 × 2.45 cm ÷ 2 strands12.3 m of floss (0.51 skein)
A Fully Metric Cross Stitch Calculator
Fabric labels use threads per inch almost everywhere, while some European linens also list threads per centimetre (for example 12.6 threads/cm for 32-count). This calculator works in either, and gives every result in metric units: stitch size in millimetres, design and fabric in centimetres, floss in metres.
threads per cm = threads per inch ÷ 2.54
stitch size (mm) = 25.4 ÷ stitches per inch
Metric Equivalents of Common Fabrics
| Fabric | Threads per inch | Threads per cm |
|---|---|---|
| Aida | 11 / 14 / 16 / 18 | 4.3 / 5.5 / 6.3 / 7.1 |
| Lugana evenweave | 25 | 9.8 |
| Evenweave | 28 | 11.0 |
| Linen | 32 / 36 / 40 | 12.6 / 14.2 / 15.7 |
Floss in Metres
A standard skein holds 8 metres of six-strand floss. The floss result shows how many metres of skein a thousand full stitches use with your fabric and strands, including a 40% allowance for starts, stops and tails.
Cross Stitch Calculator Metric FAQ
How Do You Convert Fabric Count to Metric?
To convert fabric count to metric, divide the threads per inch by 2.54. 14-count Aida is 5.5 threads per cm, 28-count evenweave is 11 threads per cm and 32-count linen is 12.6 threads per cm.
What Is 28 Count Evenweave in Metric?
28-count evenweave is 11 threads per cm, and stitched over 2 threads the fabric gives 5.5 stitches per cm, each 1.81 mm wide.
How Big Is One Cross Stitch in mm?
One cross stitch is 1.81 mm on 14-count Aida. One stitch is 2.31 mm on 11-count, 1.59 mm on 16-count and 1.41 mm on 18-count Aida.
How Many Metres of Floss for 1,000 Stitches?
1,000 cross stitches use about 12.3 m (13.4 yd) of floss on 14-count Aida with 2 strands and a 40% waste allowance. 12.3 m of 2-strand thread is 24.5 m of single strand, about half of one 8 m six-strand skein.
Are European Fabric Counts Different?
No, European fabric counts use the same threads per inch. Zweigart and other European makers label fabric by threads per inch and threads per 10 cm, so 14-count Aida reads as 54 stitches per 10 cm.