How Cross Stitch Fabric Calculator UK Works?
The cross stitch fabric calculator uk works by sizing one project piece in centimetres and counting how many pieces fit in a fat quarter, half metre or full metre. An 80 × 60 stitch design on 14-count Aida needs a 29.5 × 25.9 cm piece, and 2 pieces fit in a fat quarter.
You enter
- Width in stitches
- Height in stitches
- Fabric type and count
- Margin each side in cm
- Cut, bolt width and £ per metre
You get
- Pieces you can cut2
- Fabric per project29.5 × 25.9 cm
- Cost per project£2.25
- Shortest cut to buy30 cm
- Fabric used56%
5 Steps the Cross Stitch Fabric Calculator UK Follows
- Size the project piece. Stitches ÷ stitches per cm + 2 × margin gives the piece to cut.
- Set the purchase. A fat quarter is 50 cm × half the bolt width; a half metre is 50 cm × the full width; a metre is 100 cm × the full width.
- Pack the pieces. The calculator lays the pieces out in a grid in both orientations and keeps the layout with the most pieces.
- Price each project. Purchase price ÷ pieces gives the cost per project in pounds sterling (GBP).
- Find the shortest cut. The shortest length off the roll, cut across the full width, is rounded up to the next 10 cm.
Cross Stitch Fabric Calculator UK Formula
The cross stitch fabric uk formula is pieces = ⌊purchase length ÷ piece length⌋ × ⌊purchase width ÷ piece width⌋. The calculator tries both orientations and keeps the larger number.
stitches ÷ (count ÷ 2.54) + 2 × margin⌊ L ÷ a ⌋ × ⌊ W ÷ b ⌋metres × £ per metre ÷ piecespieces × piece area ÷ purchase area- L, W
- Length and width of the fat quarter, half metre or metre
- a, b
- Length and width of 1 project piece
- ⌊ ⌋
- Round down to whole pieces
Worked example: 80 × 60 stitches on 14-count Aida, fat quarter of 110 cm fabric
- Design size
80 ÷ 5.51, 60 ÷ 5.5114.5 × 10.9 cm - Piece size
14.5 + 15, 10.9 + 1529.5 × 25.9 cm - Pieces
⌊50 ÷ 29.5⌋ × ⌊55 ÷ 25.9⌋1 × 2 = 2 pieces - Cost per project
0.25 m × £18 ÷ 2£2.25 - Fabric used
2 × 29.5 × 25.9 ÷ (50 × 55)56%
How Much Cross Stitch Fabric to Buy in the UK
UK shops usually sell Aida, evenweave and linen as fat quarters, half metres or by the metre off a roll. This calculator works out the piece you need for one project in centimetres, then shows how many of those pieces you can cut from what you buy.
piece = (stitches ÷ stitches per cm) + 2 × margin
What Size Is a Fat Quarter?
A fat quarter is half a metre cut in half across the width. On a 110 cm bolt that's about 50 × 55 cm; on a 140 cm bolt it's 50 × 70 cm. Exact sizes vary a little between suppliers, so check the listing and pick the bolt width that matches.
Getting More From a Metre
The layout tries your piece both ways round and uses whichever fits more. The hatched area is left over. If you stitch a series of the same size, such as ornaments or cards, buying a half metre and cutting several pieces is usually cheaper per project than buying fat quarters.
Cross Stitch Fabric Calculator UK FAQ
What Size Is a Fat Quarter in the UK?
A fat quarter in the UK is 50 × 55 cm (about 20 × 22 in) when cut from 110 cm wide fabric. A fat quarter is a half metre cut in half across the width.
How Much Cross Stitch Fabric Should I Buy in the UK?
Buy the finished design plus 7.5 cm on each side, rounded up to a fat quarter, half metre or metre. An 80 × 60 stitch design on 14-count Aida needs a 29.5 × 25.9 cm piece, and a fat quarter holds 2 of them.
How Wide Is Aida Fabric in the UK?
Aida fabric in the UK comes 110 cm (43 in) wide from Zweigart and DMC rolls, and some shops sell 150 cm (59 in) wide rolls.
Is a Half Metre Better Value Than a Fat Quarter?
Yes, a half metre is better value for designs wider than 55 cm. A half metre is 50 cm × the full 110 cm width, so wide pieces fit in a half metre and not in a fat quarter.
How Much Does Aida Cost per Metre in the UK?
Aida costs about £14–£22 per metre in the UK for 110 cm wide 14-count Aida. The calculator uses £18 per metre by default; change the price to match your shop.